Contact Us

Shenzhen Huiqitong Xing Electronic Co., Ltd
[China]

Address:
803B, Western Unit, Chuangxin Technology Plaza, Tian'an, Chegongmiao, Futian District, Shenzhen, Guangdong
China

Phone:
86-755-8835-3009
86-755-2655-4259 (direct)

Contact name:
Coral Li , Sales

 

 
Shenzhen Huiqitong Xing Electronic Co., Ltd

Products
Proximity Card Reader(ERFID08M )

Product Description

About Use


When the card approach the reader, the red light turn into green, after glinting to turn redcolor again, the buzzer sound shows transiting data. It has 500ms proximity time distance for card proximity. After finishing card proximity, if the same ID card is still in the proximity range, reader will not send out the data, neither giving any sound hint. But for Different ID card entering Proximity Area, Reader can do response continually and send out the data

Product Specification / Models

·        Wiegand 26bits/ Wiegand34bits /ABA Standard Format Data Output

·        Less than 0.2 second Response Speed

·        Less than 0.5 seconds Proximity Time Distance:

·        2-15cm Proximity Range

·        Support UEM 4100 ID Card or compatible with it( 64bits, Manchester Code) and Mifare 1 Card (13.56 MHz Frequency)

·        -25℃ to 75℃ Ambient Temperature,10%-90% Ambient Humidity

·        Built-in Antenna

·        Built-in LED (Double Color LED)

·        Built-in Loud Speaker (Buzzer)

·        DC 12V Working Voltage,70mA Working Current

·        100 Meters Communication Distance

·        Real Time Data Transfer

·        Black Color

·        PVC Case Material (Black Resin for Water-Proof Function)

·        119mm*53mm*25mm

Other Information

Installation

 

Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.

 

Wire Connection

 

Red        DC 5V-16V

Black       GND

Blue         D1

White        D0

Brown        BEEP

Green        LED

Yellow       Alarm

 

 

Notice

 

1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply 

2. When external Power is used, make sure sharing the power with Controller Box or using the same GND 

 

3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires

 

Remarks
Contact: sales2ework@gmail.com

Contact Information
   Company Name: Shenzhen Huiqitong Xing Electronic Co., Ltd
   Contact Person: Coral Li  
(Your message will be sent to the supplier directly)
   Address: 803B, Western Unit, Chuangxin Technology Plaza, Tian'an, Chegongmiao, Futian District, Shenzhen, Guangdong, China
   Zip: 518040
   Telephone: 86-755-8835-3009
86-755-2655-4259 (direct)
   Fax: 86-755-8835-3008
   Web Site: http://www.eworkaccesscontrol.com


Copyright (c) Shenzhen Huiqitong Xing Electronic Co., Ltd. All Rights Reserved